Mitsubishi aircon keeps turning off

There are three variations on the issue involving a Mitsubishi aircon that keeps turning off. Each type corresponds to a specific cause and resolution.
Table of Contents
- The Mitsubishi aircon turns off by itself, and there is no light on the AC timer lamp. This case normally involves the air conditioner staying off and there is no way to turn it back on. Manually turning it on and pressing the power button on the remote control do not work.
- The Mitsubishi aircon won’t turn on or the Mitsubishi aircon cannot turn on
- The Mitsubishi aircon keeps turning itself off and the indicator lamp is blinking. This indicates an error code being signaled by the air conditioning system.

There are also many possible reasons for an air conditioning unit to keep turning off by itself. The most common causes include refrigerant leaks or low refrigerant levels, frozen evaporator coils, thermostat issues, overheating problems, dirty or clogged air filters, electrical supply or circuit problems, and short cycling issues.
All refrigerant-related issues and circuit problems will require a visit from an aircon service professional. There is no possible DIY solution to a damaged and leaking chiller pipe. There is also no DIY solution to refill servicing of refrigerant gas. You won’t be able properly repair damaged wires, burnt PCB terminals and malfunctioning circuit boards, either.
Note, too, how frozen evaporator coils can be related to refrigerant issues. Frozen evaporator coils can be caused by a pressure differential between the inside of the refrigerant pipe and the outside of the pipe. So when your aircon system does not have enough refrigerant to circulate, it creates a low pressure area inside the pipe–all in all leading to frozen coils.
If your aircon keeps turning off because of dirty , clogged air filters and thermostat issues these are scenarios you can address by yourself. To clean the aircon filter, remove the front panel hatch of the indoor unit and unclip the air filter. Scrub it clean first under soapy water. Then rinse and air dry completely before putting it back in the air conditioner. For a thermostat issue causing an aircon to turn off, simply check and carefully review your AC timer settings.
Solving sudden overheating problems that cause your aircon to automatically turn off is tricky. This is best left to experienced technicians. Check if there is anything blocking the air flow to the outdoor unit. Overheating can also happen if you have added heat sources to the room. If your Mitsubishi air conditioner’s cooling capacity is not rated to handle the extra heat, this will force it to overwork and draw more electricity. Worse, the repetitive turning off of your AC can be a compressor-related issue.
EXPLORE OUR SERVICES
Click to find out
There are three likely causes of this scenario:
- There is a defect in the wiring between the isolator and the condenser.
- A broken isolator wire.
- There is a defect in the wiring between the isolator and the MCB inside the DB box.
OUR TESTIMONIALS



The three possible causes of a Mitsubishi aircon that won’t turn on are as follows:
- There is a loose wiring jack.
- If only one indoor unit has a problem this means a defect in the indoor unit PCB.
- If all the indoor units have the same issue this means that there is a defect in the outdoor PCB.
The aircon will signal the error code. To resolve, retrieve the exact error code from your Mitsubishi aircon display and follow the corresponding troubleshooting that goes with that error code. Routine troubleshooting sometimes solves minor problems that involve your Mitsubishi aircon turning off along with flashes on the indicator lamp. You may refer to your Mitsubishi service manual and our comprehensive guides on Mitsubishi aircon error codes.









