side-area-logo

Why Panasonic aircon auto off?

Why Panasonic aircon auto off?

Panasonic aircon auto off” refers to a Panasonic air conditioner that automatically turns off for a number of reasons. The AC unit automatically turns off either to signal a defect in the system or to prevent an ongoing malfunction from spreading to other parts of the air conditioning unit. In this article, we will explore the various scenarios involving a Panasonic aircon turning off by itself and how to address them. all.

If the Panasonic aircon turns off automatically and there is no light on the timer light, it can mean a power supply issue or there is a fault in a major AC component. But to signal a particular error code, a Panasonic aircon will simply stop running, no air will be coming out of the AC, and the timer light will start to blink. The latter scenario is covered extensively in our “Panasonic Aircon Timer Blinking” article.

And, there are many possible reasons for an air conditioning unit to keep turning off by itself. The most common causes include refrigerant leaks or low refrigerant levels, frozen evaporator coils, thermostat issues, overheating problems, dirty or clogged air filters, electrical supply or circuit problems, and short cycling issues.

All refrigerant-related issues as well as circuit problems will ultimately require a visit from an aircon service professional. There is no possible DIY fix to a damaged and leaking chiller pipe or refill servicing of refrigerant gas, nor is there a DIY solution to damaged wires, burnt PCB terminals, or malfunctioning circuit boards. Meanwhile, frozen evaporator coils may be related to refrigerant issues. Frozen evaporator coils can be caused by a pressure differential between the inside of the refrigerant pipe and the outside of the pipe. When your AC system does not have enough refrigerant to circulate, this creates a low pressure area inside the pipe with respect to the air flowing around the pipe–all in all effectively leading to frozen coils.

If your aircon keeps turning off because of dirty or clogged air fillers or thermostat issues, then these two scenarios you can address by yourself. To clean the AC filter, remove the front panel hatch of the indoor unit, unclip the air filter, scrub it clean under soapy water, rinse and air dry completely before putting it back in the air conditioner. For a thermostat issue leading to an aircon turning off automatically, simply check and carefully review your AC timer settings.

Solving sudden overheating problems that may be causing your AC to automatically turn off can be tricky and is often best left to experienced technicians. Check if there is anything blocking the air flow to the outdoor unit of your air conditioner. Overheating can also happen if you have added heat sources to the room, and your air conditioner’s cooling capacity is not rated to handle the extra heat, forcing it to overwork and draw more electricity to compensate and therefore get overheated. It is also possible that you left the windows or doors open, and your room is not properly insulated. Or worse, the repetitive turning off of your AC indicates a compressor-related issue.

climate vouchers

EXPLORE OUR SERVICES

Click to find out

Panasonic aircon turns off and there is no light

Here are the likeliest reasons for a Panasonic aircon automatically turning off and there is no blinking on the timer light:

  • There is a power supply issue, a short in the circuit, or electricity is not flowing through the circuit connecting the condenser and the indoor unit. 
  • The disrupted power supply in the condenser can be due to a malfunctioning motherboard inside the condenser.
  • The cable connection between the isolator and the condenser is broken.
  • The isolator is found to be defective.
  • There is an issue with the MCB.
  • There is a fault in the wiring connecting the DB box to the isolator.

Note that the Panasonic air conditioner’s isolator wire, which is also known as the isolator switch, is a safety device which cuts off the power supply to the circuit connected to the air conditioner. During aircon maintenance or an emergency situation, the switch can be easily disconnected to protect electricians and HVAC technicians servicing the AC. When there is an electrical fault, the isolator switch also helps prevent damage to the other circuits in the house. The MCB, on the other hand, automatically switches off when there is a power spike or an overload of the capacity to which the MCB has been rated to handle. Unlike an isolator switch, an MCB is designed to automatically trip during a short circuit to effectively protect the devices connected to its circuit.

OUR TESTIMONIALS

Facebook Review
Carousell Review
Qoo10 Review

Panasonic aircon turns off and the light is blinking

Whenever a Panasonic aircon automatically turns off and the AC timer starts to blinks, be prepared to self-diagnose and troubleshoot the issue the way you would an error code. It can mean a malfunction being detected in one or several parts of either the indoor or outdoor sub-unit. It can also mean that the Panasonic air conditioning unit has detected an incompatibility in the system; for example, a mismatch wherein a system 3 aircon is connected to only one fan coil unit is expectedly going to be detected as an error. Or, a blinking AC timer light simply means the refrigerant gas level is low and the air conditioner needs a gas top up service.

Panasonic aircon parts that might be faulty and will need replacement

In a “Panasonic aircon auto off” situation, here are the Panasonic aircon spare parts that might be failing and, if diagnosed to be faulty, will need to be replaced with working ones:

  • Outdoor PCB
  • Panasonic fan motor (outdoor or indoor)
  • Wire connecting the condenser and the isolator (if all indoor units have no blinking timer light)

Click to find out our

AIRCON PROMOTION

DAIKIN

Daikin ceiling cassette

MIDEA

Midea Ceiling Cassette

PANASONIC

Panasonic Aircon Promotion

MITSUBISHI

Mitsubishi Aircon Promotion

Conclusion

A Panasonic aircon auto off issue generally means a possible power supply, circuit, or wiring problem if the timer light is off and is not blinking. An error code, on the other hand, is indicated by the Panasonic AC unit automatically turning off and a blinking timer light. In the latter case, the troubleshooting that will be required to narrow down the potentially defective part becomes much more involved.

Recommend
  • Facebook
  • Pinterest
Share
Tagged in
Leave a reply